Step-by-Step Guide
Here’s how to pair your Tadi Brothers digital transmitters:
1. Connect the Transmitter
Begin by connecting the transmitter to the camera. Use the RCA cable and the barrel connector to connect the power. This demonstration uses an RV camera, but you can use any Tadi Brothers camera.
2. Power the Transmitter
Connect the pigtails of the transmitter to a 12-volt power source in your vehicle. The red light will indicate that the transmitter is powered on.
3. Connect the Receiver
Plug the receiver, marked with an “R,” into the monitor. Ensure the monitor is powered by connecting it to the harness and the 12-volt output. The receiver should light up, indicating it is powered on.
4. Pair the Devices
If the devices do not automatically pair, follow these steps:
- Press and hold the button on the transmitter for three seconds until it starts pairing.
- On the camera side, press and hold the button for three seconds until it starts blinking.
- Once the pairing is successful, the red light will stop blinking and indicate a stable connection.
Additional Tips
Ensure all connections are secure and double-check the pairing process if you encounter any issues. If you need further assistance, our support team is here to help.
For more options and accessories, visit our wireless backup camera product page.
Thank you for choosing Tadi Brothers! If you have any questions, feel free to contact our support team.