Step-by-Step Guide
Follow these steps to change the orientation of your side camera:
1. Remove the Screws
Unscrew all the screws on the camera housing. Typically, there are three screws on the back and two on the sides. Carefully remove the housing cover.
2. Adjust the Orientation
Locate the warranty label on the camera. To flip the image, the warranty label should be on the top. Adjust the camera position accordingly.
3. Reassemble the Camera
Place the housing cover back and start screwing it in. Start with the screws on the back, followed by the side screws. Ensure everything is tightened securely.
4. Fine-Tune the Angle
Once reassembled, you can fine-tune the camera angle. Adjust it up or down as needed to get the desired view.
Additional Tips
Make sure all screws are tightly secured to avoid any loose connections. Double-check the camera angle before finalizing the setup.
For more camera options, visit our product page.
Thank you for choosing Tadi Brothers! If you have any questions, feel free to contact our support team.